Control Mode: ART-NET/DMX                       Product Weight(including controller): 2KG



Modular design

The installation process is fast and convenient;

No need to disassemble the entire screen, convenient for maintenance;

Software connection to ribbon screen,Connect to the controller signal input port via a network cable.

DMX Mode

Console Connection to Flexible Screen: The control console is connected to the controller via a signal conversion board.

Channel        Name                      Figure                Instructions
1                   Mode Selection       000-247            Call internal 31 effects (one effect for every 8 addresses, and 0-7 for SD card effect)
                                                     248-255            Switch to ART_NET mode

2                   Speed                      000-255            0 is the slowest speed, 255 is the fastest speed, SD card mode is valid

3                   Brightness               000-255            0 is the brightness off, 255 is the brightest, SD card mode is valid

4                   R- mask                   000-255            Subtract red from the effect. 000 is the original effect, and 255 means subtract all red from
                                                                               the effect

5                   G-mask                    000-255            Subtract green from the effect. 000 is the original effect, and 255 is subtracting all green
                                                                               from the effect

6                   B-mask                    000-255            Subtract the blue in the effect. 000 is the original effect. 255 means subtract all the blue in
                                                                               the effect

7                   Invalid                      000-007
                     Normally on             008-015            Constant bright white, color selection by mask (brightness, mask channel available)
                     Stroboscopic            016-255           The higher the value, the faster the strobe (speed, brightness, mask channel is effective)

8                   Invalid                       000-200
                     Record                      201-255          When the value of channel 4.5.6 is 255, the recording is valid and the ART_NET effect is
                                                                              recorded to the file specified by channel 1